Virgin Cast Nylon Roller Green Cast Nylon Tube Black Mc Nylon CNC Machining Center Parts

• Customization: Available
• After-sales Service: Available
• Warranty: One Year
• Model NO.: Cast Nylon0045
• Material: Mc Nylon
• Kind: Engineering Plastic Sheet
• Water Absorption: 1.5%~3.5%
• Contraction Percentage: ＜0.4%
• Tensile Strength: 81~130MPa
• Impact Strength: 50j/M
• Dielectric Strength: 25kv-mm
• Color: Natural, Blue, Green, etc
• Certificate: TDS, SGS
• Transport Package: 1000kgs/Pallet
• Specification: 1000*2000mm/1220*2440mm/1500*3000mm&Cu
• Trademark: customer requested
• Origin: China
• HS Code: 3917290000
• Production Capacity: 3000tons/Month

Product Description

Product Parameters

Nylon -CAST Nylon 6, UNFILLED - Sheets, Rods & Tubes
So what makes nylon suitable for so many applications? A quick look at the material's basic properties compared to other common materials shows why. Nylon has excellent tensile and compressive strength, good wear properties and is an excellent electrical insulator. It can also be modified to improve just about any individual property; plasticizers improve impact strength, lubricants reduce coefficient of friction, anti-oxidizers improve operating temperature range, glass fibers improve rigidity, other additives allow the use of colored nylons in direct food contact applications.

• Available in Sheets, Rods, & Tubes & Near-Net Shapes
• Nylon is prone to water absorption & should not be used in high-humidity or underwater applications.

Key Features:

• Excellent bearing properties
• High impact strength and toughness
• Low power factor requirements
• High wear resistance
• Very good sliding properties

Applications:

• High load bearings
• Wear pads
• Support and Guide wheels
• Conveyor and Tension rollers
• Wire rope sheaves
• Buffer pads
• Gears...

Nylon Products:

• Extruded Nylon 6 (PA 6) - natural (white) / black:

Offers an optimal combination of mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These properties, together with a favourable electrical insulating ability and a good chemical resistance make extruded nylon 6 a "general purpose" grade for mechanical construction and maintenance.
 

• MC Nylon 6 (PA 6) - natural (ivory) / black:

Unmodified cast nylon 6 grade exhibiting characteristics which come very close to those of nylon 66. It combines high strength, stiffness and hardness with good creep and wear resistance, heat ageing properties and machinability.
 

• MC Nylon 6 + oil filled (PA6 + oil) - green:

This internally lubricated cast nylon 6 is self-lubricating in the real meaning of the word. Oil filled MC nylon 6, especially developed for unlubricated, highly loaded and slowly moving parts applications, yields a considerable enlargement of the application possibilities of nylons. This because of its reduced coefficient of friction (up to -50%) and improved wear resistance (up to x 10).
 

• Nylon 6 + MOS2 (PA6 + MoS²) - grey black:

The addition of MoS² renders this material somewhat stiffer, harder and dimensionally more stable than nylon 66, but results in some loss of impact strength. The nucleating effect of the molybdenum disulphide results into an improved crystalline structure enhancing bearing and wear properties.
 

• Nylon 6+ GF30 (PA 6-GF30) - black:

when compared with virgin nylon 6, this 30% glass fibre reinforced and heat stabilised nylon grade offers increased strength, stiffness, creep resistance and dimensional stability whilst retaining an excellent wear resistance. It also allows higher max. service temperatures.
 

• Nylon 66: this material with a higher mechanical strength, stiffness, heat and wear resistance than extruded nylon 6. It also has a better creep resistance but its impact strength and mechanical damping ability are reduced. Well suited for machining on automatic lathes.

 

Trade names:	Polyamides, PA,Nylon
Available Shapes:	Sheets, Rods, Tubes, Plates,Parts
Color:	Natural White, Black, Green, Others
Sheets Thickness:	7mm~200mm
Size:	1020*1080,1100*2050,1220*1220,1300*2260,1300*2460,1300*2640mm
Rods Diameter:	20mm~400mm
Length:	1000mm~6000mm

Company Profile

 

 

 

Detailed Photos

 

 

 

Packaging & Shipping

 

 

FAQ

1. Q: What color can you make?

A: Usually we can make the regular color, like green, blue, black, yellow, grey and so on. Or you can offer the pantone color number for reference to produce.

2.Q: What is your MOQ?

A: It depends on the drawing.

3. Q: What is your delivery time?

A: It depends on the volume, usually it is about 7 days.

4. Q: How can I get a sample?

A: Small size of sample are free, you only need to pay for the shipping cost, or you can provide your UPS, DHL, Fedex, TNT courier account to us. Customized size of sample should be charged.

5. Q: What is your payment ?

A:30% T/T in advance,  balance before shipment. Other terms negotiable.